Create professional experimental setup diagrams online with ease Participants would start each trial with their hands resting on the start point and looking at the fixation point until one of the trays lit up This intuitive diagram maker lets you design clear, accurate diagrams for lab setups, experiments, and scientific presentations.
Kourtney Kardashian Nude, The Fappening - Photo #314866 - FappeningBook
The experimental setup consists of a laser source (ls) coupled into the sample (s) by the microscope objective (obj) and dichroic mirror (dm)
This research focused on the effects of compartment window woodblock areas on backdraft time, with a video recording of the experimental phenomena.
A typical region of observation is shown (top left) Inset shows a closer view of several cells stuck to the coverslip White led light was passed through a suitable excitation filter (ex) before illuminating the sample. The width and depth of the microchannel were 200 and 79 μm
The total length of microchannel was 110 mm The heights of the chaotic mixer structures were 0, 11, and 31 μm, for the nc device (without micromixers), the cm_11 device, and the cm_31 device, respectively An enlarged image shows one cycle of the chaotic mixer structures The cm_11 and cm_31 devices were equipped with 69 cycles of.
A schematic of the experimental setup showing the two optical paths that can be chosen with the flip mirror (fp)
(1) optical pulses cross the fel pulse with a 10° angle at the centre of the vmi (2) optical pulses propagate collinearly with the fel pulse (see the text).
